Al parecer la nueva producción de Hana Modz del fabricante Chino Hotcig, empiezan a cumplir controles de calidad bastante buenos. Solo hace falta ver las nuevas fotografías de su cableado interior para comprobar el cuidado con el que están ensamblando las nuevas unidades con el chip de 20W, 30W y 32W. Todas las incidencias mencionadas anteriormente en mi video revisión han sido corregidas y al parecer ahora todo funciona como la seda.
A continuación os muestro las especificaciones de cada modelo y sus funcionalidades avanzadas (en inglés). 
Shenzhen Hot Technology Co.,Ltd
DNA 20 Manual
1. Wiring diagram of DNA 20
Specification
Output Voltage:4 v- 8.3 v
Output Power:7w-20w
Efficiency:94%
Screw Thread:510\ego thread
Resistance:1.0- 3.3Ω
Battery:18650 battery/ 2pcs 18350 battery/ 2pcs (500+500 mAh) li-po battery
DNA 30 Manual
1. Wiring diagram of DNA 30
Specification
Output Voltage:4 v- 8.3 v
Output Power:7w-30w
Efficiency:94%
Screw Thread:510\ego thread
Resistance:0.4- 3.3Ω
Battery:18650 battery/ 2pcs 18350 battery/ 2pcs (500+500 mAh) li-po battery
DNA 32Manual
1. Wiring diagram of DNA 32
Specification
Output Voltage:4 v- 8.3 v
Output Power:7w-32w
Efficiency:94%
Screw Thread:510\ego thread
Resistance:0.4- 3.3Ω
Battery:18650 battery/ 2pcs 18350 battery/ 2pcs (500+500 mAh) li-po battery
Normal Operation
Watt setting: The power level currently set on the DNA 20
Battery indicator: The current state of charge of the battery.
Volts display: The current or most recent output voltage being supplied to the atomizer.
Ohms display: The resistance of the atomizer attached to the device. This is measured only when the unit is supplying power to the atomizer. At other times, it shows the most recent measurement.
4. Modes
Other modes
Locked mode: Pressing the fire button five times with less than 7 seconds between presses will cause the device to enter Locked mode. In Locked mode, the device will not fire and the output power will not adjust accidentally. While in Locked mode, the screen will be off, except that pressing a button will show “Locked, Click 5X”. To exit Locked mode, press the fire button 5 times.
Stealth mode and Normal mode: While locked, pressing the fire and down buttons simultaneously for a while seconds will switch to stealth mode. In this mode the display is off. It will still show error messages and the “Locked, Click 5X” advisory. To switch back to normal display mode, from locked mode hold down the fire and down buttons simultaneously for a while seconds. This setting is stored to internal flash memory, and remains if power is removed.
Right Mode and Left Mode: While locked, holding the fire and up buttons simultaneously for a while seconds flips the display. This allows for maximum flexibility in designing the mod, as well as accommodating left handed vapers. This setting is stored to internal flash memory, and remains if power is removed. Please note that if using a potentiometer instead of a button, this option is not available. However, it can be set before soldering the potentiometer on during manufacture.
